Does anyone out there make a standard 2-Axis CNC Drill with the following features:
1). 10 - 20 HP Spindle with coolant thru the tool capability.
2). Travels in the "Y" and "Z" axis only. The column/head must move in/out NOT the table. "X" axis travel is not needed.
3). Drilling two (2) to four (4) holes in ends of pipe (thru both walls). Length of pipe from 10' - 20' long.
4). Potential Rotary Axis with large thru hole to clamp and rotate the pipe for pipe up to 6" in diameter.
5). Enclosed so high-speed inserted carbide tooling can be used.
Please send me a PM if anyone has an idea. Optional solution is a specially designed 2-Axis Drill specific to our application. Looking for a quick, cost-effective solution.
SJS
1). 10 - 20 HP Spindle with coolant thru the tool capability.
2). Travels in the "Y" and "Z" axis only. The column/head must move in/out NOT the table. "X" axis travel is not needed.
3). Drilling two (2) to four (4) holes in ends of pipe (thru both walls). Length of pipe from 10' - 20' long.
4). Potential Rotary Axis with large thru hole to clamp and rotate the pipe for pipe up to 6" in diameter.
5). Enclosed so high-speed inserted carbide tooling can be used.
Please send me a PM if anyone has an idea. Optional solution is a specially designed 2-Axis Drill specific to our application. Looking for a quick, cost-effective solution.
SJS