I'm rebuilding my Lyndex Axial Dual Spindle live tooling holders. They require 2 pairs of Angular Contact Bearings. ( 1 pair at each end of the spindle axle ) These bearings are directional with an arrow marking on the outer race
( > ). My question is, what configuration should they be installed in? Example: << - >>, <> - <>, >< - >< or >> - <<. The last one I rebuilt was with the << - >> configuration and the tool holder now has a bit of play on the driven spindles so, I'm assuming that's the wrong way.
( > ). My question is, what configuration should they be installed in? Example: << - >>, <> - <>, >< - >< or >> - <<. The last one I rebuilt was with the << - >> configuration and the tool holder now has a bit of play on the driven spindles so, I'm assuming that's the wrong way.