I've posted problems and have recieved some good help. I solved an ongoing problem for me
just wanted to pass along. Running 3/8 1018 on citizen swiss 17" long turn and thread 6X1mm
thread .750 long on each end. Always had parts with shaving wrapped around thread causing an alarm
when feeding into sub or have to remove before shipping parts. This time after threading went back in with
threader .005 shy of shoulder .005 bigger than major reversed spindle and walked out to Z0.0 on both ends.
Only slowed down slightly and got rid of wrap around shaving by unscrewing it from the part it worked really well.
RD
just wanted to pass along. Running 3/8 1018 on citizen swiss 17" long turn and thread 6X1mm
thread .750 long on each end. Always had parts with shaving wrapped around thread causing an alarm
when feeding into sub or have to remove before shipping parts. This time after threading went back in with
threader .005 shy of shoulder .005 bigger than major reversed spindle and walked out to Z0.0 on both ends.
Only slowed down slightly and got rid of wrap around shaving by unscrewing it from the part it worked really well.
RD