Slow Motion HSM

I posted this in the middle of another thread but thought I would just make a thread about it so more could see it. The 1st actual cut is a pressure pass and it returns to full speed at the end of the video. We had the rapid turned down for the 1st half of the video. Here are the parameters:

1018 CRS
3/4" 5 flute variable Helix 2.25 LOC
2" Axial cut
.05 Radial cut
900 SFM
.091/rev
4585 RPM
417 ipm

https://www.youtube.com/watch?v=1DRX69CST_c